How to customize the packaging box?

First. Production method

1. Design drawings

First of all, according to the requirements of manufacturers and design requirements, the design drawings of packaging cartons are made. The drawing should include the size, structure, material and other information of the carton for reference in the subsequent production of real samples.

2. Select materials

According to the drawing requirements, choose the appropriate paper material. Commonly used paper are kraft paper, whiteboard paper, coated paper, etc. The quality and thickness of the paper have an impact on the appearance and structure of the solid sample.

3. Create a template

According to the design drawing, make the template of the packaging carton. The template is the key to the production of real samples, which determines the shape and size of the carton. When making the template, it should ensure that the size is accurate, the edge is neat, and the Angle is accurate.

4. Paste and assemble

The paper is cut and pasted according to the template to form the preliminary shape of the carton. When pasting, attention should be paid to the flatness and adhesion of the paper to ensure the quality of the solid sample.

5. Sand and finish

After the initial assembly is completed, the paper box is polished to make its appearance smoother and more beautiful. At the same time, check whether the structure of the carton meets the design requirements, and correct the unqualified part.

6. Surface treatment

According to the needs, the surface of the real sample is printed, hot stamping, etc., to improve the appearance and texture of the carton. During the processing process, care should be taken to protect the surface of the carton from being damaged or dirty.

7. Size calibration

Finally, the real sample is calibrated to ensure that it is consistent with the design drawing. Size calibration includes measuring the length, width, height and Angle of the carton and comparing it with the design drawing. If there is any error, it should be adjusted in time.

Second. Precautions

1. Material selection should be appropriate

The quality and thickness of the paper have an effect on the appearance and structure of the solid sample. Therefore, when choosing paper, the appropriate paper type and specification should be selected according to the design requirements and actual needs.

2. Make it carefully

In the process of making real samples, it is necessary to be careful and patient and pay attention to details. From the drawing of the design drawing to the production of the template to the pasting and assembly of the carton, it is necessary to operate in strict accordance with the requirements.

3. High dimensional accuracy

The dimensional accuracy of the real sample production is required to be higher, because once the real sample production is completed, the subsequent mass production will be based on it. Therefore, the size should be measured and calibrated several times during the production process to ensure that the accuracy meets the requirements.

4. Finish properly

Surface treatment can improve the appearance and texture of the carton, but improper treatment may also cause the carton to be damaged or dirty. Therefore, care should be taken in the surface treatment process, and pay attention to protecting the surface of the carton.

5. Production costs should be reasonable

While a good sample is a necessary step, it is also necessary to pay attention to cost control. When choosing paper, materials and processes, cost accounting should be carried out according to the actual situation to avoid waste and unnecessary expenses.

To customize a packaging box that suits you, you need to consider a number of factors, including type, material, size, design and details. Attention to detail and a reasonable budget are needed to make customized packaging boxes achieve the best results and value.